This homeowner had been relying on the same 50-gallon gas water heater for around 25 years. While it had a pretty impressive run, it was definitely time for an upgrade.
During the inspection, we also found the home’s water pressure was sitting at about 115 PSI, which is much higher than recommended. The existing pressure reducing valve had failed, so simply replacing the water heater wouldn’t have solved the underlying issue.
We installed:
- A new 50-gallon gas water heater
- A new 1″ pressure reducing valve (PRV)
- A properly charged thermal expansion tank
- New water heater flex connections
Once everything was connected, we tested the system, checked every connection for leaks, and confirmed everything was working as it should. The customer may notice slightly cloudy water at first, which is completely normal after a water heater replacement and clears up after running the faucets for a short time.
